Refurbished - Showtime Director - GARAGE SALE
Description
Refurbished products have either had minor repair work, or were returned by a customer after minimal or no use during the money back guarantee warranty period. All refurbished products have been tested and are in good working condition.
The N4-G4-MP3 Director is a compact, powerful Light-O-Rama Show Director with a MP3 Player that is designed to take the place of your PC for a show at Christmas, Halloween, or any other event. This device has four networks.
The N2-G4-MP3 Director is a compact, powerful Light-O-Rama Show Director with a MP3 Player that is designed to take the place of your PC for a show at Christmas, Halloween, or any other event. This device has two networks.
To use this Director with RGBPlus sequences, you must have firmware version 6.11 or higher installed.
The unit is simple to operate. Just insert a SD memory card and connect the director to the first controller in your network with a Cat5 line (instead of connecting that controller to a USB485 adapter then your PC).
The on-board real-time clock with power-fail back can be used to schedule shows. Six trigger inputs allow shows to be started by external events, usually momentary switches and/or motion detectors.
This unit is housed in a rugged steel housing with convenient mounting slots on the sides. It can be placed inside your house/garage as is, or placed in an enclosure for outdoor use. This unit performs in temperatures down to -40 degrees.
A SD card writer is required to move the show from your PC to the SD card. If you do not already have one, you should add the SD Card Reader/Writer to your purchase.
Network Speed
Director |
19.2K-57.6K-115K | 500K high speed | 1000K high speed | ELOR (Enhanced) Pro Level |
DMX 512 |
E1.31 (DMX over Ethernet) |
|
| G4-MP3-Director | G4-MP3 Generation 4 deluxe stand-alone show director with MP3 player and real-time clock using latest available firmware. Two or Four networks. |  |
|
|
|
|
|
| uMP3g4 miniDirector | Mini-Director uMP3g4 Generation 4 stand-alone show director with MP3 player using latest available firmware. One network. | |
|
|
|
|
|
| G3-MP3-Director | G3-MP3 Generation 3 deluxe stand-alone show director with MP3 player and real-time clock using latest available firmware. | |
|
|
|
|
|
| uMP3g3 miniDirector | Mini-Director uMP3g3 Generation 3 stand-alone show director with MP3 player using latest available firmware. | |
|
|
|
||
Power Cord
The Showtime Director will receive its power from the nearest controller in the majority of cases. A 12V Wall Power Adapter is NOT included with this purchase. You must purchase a 12V Wall Power Adapter to provide power to your Director if ANY of the following are true:
- You would like to connect an external timer instead of using the built in timer on this device
- Your first network contains nothing except our singing faces and Pixie2 controllers
- You will not have any controllers connected to Network 1
To provide auxiliary power to a Director with a Pixie4, Pixie8 or Pixie16, the Pixie must be connected to Net 1 and the jumper must be placed on JP2 of the board to provide power. The jumper is not on the board by default. You do not need to place this jumper if there is an AC Unit that provides power connected to Net 1.
SD Card
If you need a backup card for your Showtime Director, we suggest Kingston or Gigastone Technology 4GB SDHC class 4 SD memory cards because they're rated to work at -20 degrees. SD or SDHC memory cards should be formatted as FAT16 or FAT32. SDXC memory cards (typically 64GB and higher) will not work unless the device is partitioned so the first partition is formatted as FAT32.
Your backup card MUST be 32gb or LESS.
We do NOT recommend using class 2 memory cards. Look for a 2 with a 'C' around it. These are very slow cards and most have trouble keeping up with the demands from Light-O-Rama.
We do NOT recommend any SanDisk SDHC memory cards. Many of our customers have reported issues making them work in Light-O-Rama ShowTime Directors.
Details
Don’t want to dedicate a personal computer to control your show? We’ve made it easy with our ShowTime Director series. Simply create your show as normal with our ShowTime Sequencing Suite on your Microsoft Windows based computer, use a Light-O-Rama application to transfer all the show commands and audio to an SD memory card and plug that SD memory card into one of our ShowTime Directors. The Light-O-Rama ShowTime Director replaces your computer in a Light-O-Rama data network.
The miniDirector uses just one LOR data network and starts running the show as soon as power is applied or a trigger is activated. The miniDirector can handle one LOR data network.
The N2-G4-MP3 Director has a built-in clock for scheduling shows and can handle two LOR data networks.
The N4-G4-MP3 Director has a built-in clock for scheduling shows and can handle four LOR data networks.
How many typical songs and sequences will fit on one SD memory card? For 128Kbs encoded MP3 music files and average sized corresponding sequence files, a 512 MB SD card will hold about four hours of lighting commands and audio. You’ll have plenty of capacity for your shows.
Example: N4-G4-MP3 ShowTime Director (with real-time clock)
The fourth generation N4-G4-MP3 ShowTime Director unit is simple to operate. It's designed to control four data networks of Light-O-Rama controllers while simultaneously playing MP3 music files. Create an SD memory card with your show commands, music and schedule using our ShowTime Sequencing Suite, insert the card in the ShowTime Director and you’re done. The Director will run the show based on the predetermined schedule.
The N4-G4-MP3 ShowTime Director supports four high-speed 1000Kbps networks for big displays containing large numbers of smart pixels. Don't need four networks but want the real time clock? Try the N2-G4-MP3 instead.
SD cards up to 32GB are supported.
The unit is housed in a rugged steel housing with convenient mounting slots on the sides. It can be placed on a desktop or mounted in a suitable enclosure for outdoor use. This unit performs in temperatures down to -40 degrees and typically powers itself from a nearby Light-O-Rama controller. 6.5″w x 2.75″h x 1.25″d. The N4-G4-MP3 ShowTime Director is not weatherproof.
Pop out the SD card at any time and insert another to switch shows and/or schedules. The N4-G4-MP3 Director will start the new SD card shows when the card is inserted, as specified by the schedules and/or in response to input triggers. The Director can be powered by a nearby Light-O-Rama controller, so you just turn on power to the controller to start the show. The ShowTime Director can also be powered by your external 12VDC power supply that you can use to turn on and off the show if you don't want to use the internal timer.
The ShowTime Director can also control DMX-512 universes (one on each data network). The sequences must only have DMX-512 universes defined in them. If there is a Light-O-Rama data network defined in the sequence, it will take precedence over any DMX-512 universe.
Need input triggers?
The N4-G4-MP3 ShowTime Director has six external triggers built in. Connect each to a button and link the button to a specific show. When the viewer pushes the button the appropriate show is played. Special note: the ShowTime Director does not accommodate InputPup triggers.
How do you use an MP3 Director with multiple network ports? (N2-G4-MP3 or N4-G4-MP3)
1. The Light-O-Rama ShowTime Sequencing Suite works on your personal computer running Microsoft Windows and allows you to design your own shows. When your show is ready, the show commands and audio are transferred to a standard SD memory card.
2. The standard SD memory card with all the show commands and audio is plugged into your ShowTime Director. The computer running your ShowTime Sequencing Suite is no longer needed.
3. The N2-G4-MP3 ShowTime Director shown replacing the computer.
4. The ShowTime Director can run your show continuously, automatically start/shows shows from it’s built-in clock or use an external triggering device such as a push button or motion sensor.
5. The ShowTime Director has a standard stereo 1/8″ mini-jack for connecting the audio to your sound system or FM transmitter.
6. The Light-O-Rama professional or residential high voltage AC light controllers include special effects such as simple on/off, intensities, smooth fading, twinkling, shimmering. Over 200 controllers can be daisy chained, mixed and matched on one LOR network giving you the ability to command thousands of channels. Need more channels? Add another Light-O-Rama network.
7. Electrical power is supplied to the controller placed close to your lights so you don’t need to run long extension cords. Commands from the ShowTime Sequencing Suite via the ShowTime Director are performed on each controller. Power to each of the attached lighting circuits is controlled independently.
8. The N2-G4-MP3 ShowTime Director can run two dedicated data networks. The networks can be configured as ‘high-speed’ and perfect for high-channel-count pixel displays using our Cosmic Color Ribbons, Bulbs and Pixels.
9. Multiple Cosmic Color Ribbon, Bulbs and Pixel devices connected.
Using multiple N4-G4-MP3 Directors
Want to get even bigger? You can have multiple N4-G4-MP3 Directors and sync them together over a standard LOR data network or wirelessly.
1. The Light-O-Rama ShowTime Sequencing Suite works on your personal computer running Microsoft Windows and allows you to design your own shows. When your show is ready, the show commands and audio are transferred to a standard SD memory card.
2. The standard SD memory card with all the show commands and audio is plugged into your ShowTime Director. The computer running your ShowTime Sequencing Suite is no longer needed.
3. The N4-G4-MP3 ShowTime Director shown replacing the computer.
4. The ShowTime Director can run your show continuously, automatically start/shows shows from it’s built-in clock or use an external triggering device such as a push button or motion sensor.
5. The ShowTime Director has a standard stereo 1/8″ mini-jack for connecting the audio to your sound system or FM transmitter.
6. The Light-O-Rama professional or residential high voltage AC light controllers include special effects such as simple on/off, intensities, smooth fading, twinkling, shimmering. Over 200 controllers can be daisy chained, mixed and matched on one LOR network giving you the ability to command thousands of channels. Need more channels? Add another Light-O-Rama network.
7. Electrical power is supplied to the controller placed close to your lights so you don’t need to run long extension cords. Commands from the ShowTime Sequencing Suite via the ShowTime Director are performed on each controller. Power to each of the attached lighting circuits is controlled independently.
8. The N4-G4-MP3 ShowTime Director can run four dedicated data networks. The networks can be configured as ‘high-speed’ and perfect for high-channel-count pixel displays using our Cosmic Color Ribbons, Bulbs and Pixels.
9. Multiple Cosmic Color Ribbon, Bulbs and Pixel devices connected.
uMP3g4 ShowTime miniDirector
The Light-O-Rama miniDirector is a compact, powerful show director designed to take the place of your PC. It directs a network of LOR controllers or a DMX-512 universe while simultaneously playing MP3 audio files. If there is a Light-O-Rama data network defined in the sequence, it will take precedence over the DMX-512 universe.
Three trigger inputs allow shows to be started by external events like switch closures or motion detectors.
The uMP3g4 ShowTime miniDirector is not weatherproof.
Open the Light-O-Rama ShowTime Sequencing Suite, use the built-in utility to put your show and music on an SD memory card, insert the SD card into your ShowTime miniDirector and watch the lights dance to the music. TheShowTime miniDirector runs your show as soon as power is applied or a trigger is activated. The miniDirector has no real-time clock for scheduling shows.
How do you use a uMP3g4 miniDirector?
1. The Light-O-Rama ShowTime Sequencing Suite works on your personal computer running Microsoft Windows and allows you to design your own shows. When your show is ready, the show commands and audio are transferred to a standard SD memory card.
2. The standard SD memory card with all the show commands and audio is plugged into your ShowTime miniDirector. The computer running your ShowTime Sequencing Suite is no longer needed.
3. The ShowTime miniDirector (ShowTime runs your show and is typically powered from a nearby controller.)
4. The ShowTime miniDirector can run your show continuously anytime power is supplied or use external triggering device such as a push button or motion sensor.
5. The ShowTime miniDirector has a standard stereo 1/8″ mini-jack for connecting the audio to your sound system.
6. (upper example) The Light-O-Rama high voltage AC light controllers include special effects such as simple on/off, intensities, smooth fading, twinkling, shimmering. Over 200 controllers can be daisy chained and mixed/matched on one LOR network giving you the ability to command thousands of channels. Need more channels? Add another Light-O-Rama network.
7. (upper example) Electrical power is supplied to the controller placed close to your lights so you don’t need to run long extension cords. Commands from the ShowTime Sequencing Suite are performed on each controller. Power to each of the attached lighting circuits is controlled independently.
8. (lower example) Smart pixel controller including Cosmic Color and Pixie controllers.
9. (lower example) Smart pixel packages such as a 16×25 (16 vertical strands of 25) or 16×50 (16 vertical strands) pixel trees.
User Manual
View the user manual for the Light-O-Rama Showtime Directors here.
Warranty
All sales are final for Garage Sale products.
Click for more info on product warranties
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Refurbished - Showtime Director - GARAGE SALE
Refurbished - Showtime Director - GARAGE SALE
Description
Refurbished products have either had minor repair work, or were returned by a customer after minimal or no use during the money back guarantee warranty period. All refurbished products have been tested and are in good working condition.
The N4-G4-MP3 Director is a compact, powerful Light-O-Rama Show Director with a MP3 Player that is designed to take the place of your PC for a show at Christmas, Halloween, or any other event. This device has four networks.
The N2-G4-MP3 Director is a compact, powerful Light-O-Rama Show Director with a MP3 Player that is designed to take the place of your PC for a show at Christmas, Halloween, or any other event. This device has two networks.
To use this Director with RGBPlus sequences, you must have firmware version 6.11 or higher installed.
The unit is simple to operate. Just insert a SD memory card and connect the director to the first controller in your network with a Cat5 line (instead of connecting that controller to a USB485 adapter then your PC).
The on-board real-time clock with power-fail back can be used to schedule shows. Six trigger inputs allow shows to be started by external events, usually momentary switches and/or motion detectors.
This unit is housed in a rugged steel housing with convenient mounting slots on the sides. It can be placed inside your house/garage as is, or placed in an enclosure for outdoor use. This unit performs in temperatures down to -40 degrees.
A SD card writer is required to move the show from your PC to the SD card. If you do not already have one, you should add the SD Card Reader/Writer to your purchase.
Network Speed
Director |
19.2K-57.6K-115K | 500K high speed | 1000K high speed | ELOR (Enhanced) Pro Level |
DMX 512 |
E1.31 (DMX over Ethernet) |
|
| G4-MP3-Director | G4-MP3 Generation 4 deluxe stand-alone show director with MP3 player and real-time clock using latest available firmware. Two or Four networks. | |
|
|
|
|
|
| uMP3g4 miniDirector | Mini-Director uMP3g4 Generation 4 stand-alone show director with MP3 player using latest available firmware. One network. | |
|
|
|
|
|
| G3-MP3-Director | G3-MP3 Generation 3 deluxe stand-alone show director with MP3 player and real-time clock using latest available firmware. | |
|
|
|
|
|
| uMP3g3 miniDirector | Mini-Director uMP3g3 Generation 3 stand-alone show director with MP3 player using latest available firmware. | |
|
|
|
||
Power Cord
The Showtime Director will receive its power from the nearest controller in the majority of cases. A 12V Wall Power Adapter is NOT included with this purchase. You must purchase a 12V Wall Power Adapter to provide power to your Director if ANY of the following are true:
- You would like to connect an external timer instead of using the built in timer on this device
- Your first network contains nothing except our singing faces and Pixie2 controllers
- You will not have any controllers connected to Network 1
To provide auxiliary power to a Director with a Pixie4, Pixie8 or Pixie16, the Pixie must be connected to Net 1 and the jumper must be placed on JP2 of the board to provide power. The jumper is not on the board by default. You do not need to place this jumper if there is an AC Unit that provides power connected to Net 1.
SD Card
If you need a backup card for your Showtime Director, we suggest Kingston or Gigastone Technology 4GB SDHC class 4 SD memory cards because they're rated to work at -20 degrees. SD or SDHC memory cards should be formatted as FAT16 or FAT32. SDXC memory cards (typically 64GB and higher) will not work unless the device is partitioned so the first partition is formatted as FAT32.
Your backup card MUST be 32gb or LESS.
We do NOT recommend using class 2 memory cards. Look for a 2 with a 'C' around it. These are very slow cards and most have trouble keeping up with the demands from Light-O-Rama.
We do NOT recommend any SanDisk SDHC memory cards. Many of our customers have reported issues making them work in Light-O-Rama ShowTime Directors.
Details
Don’t want to dedicate a personal computer to control your show? We’ve made it easy with our ShowTime Director series. Simply create your show as normal with our ShowTime Sequencing Suite on your Microsoft Windows based computer, use a Light-O-Rama application to transfer all the show commands and audio to an SD memory card and plug that SD memory card into one of our ShowTime Directors. The Light-O-Rama ShowTime Director replaces your computer in a Light-O-Rama data network.
The miniDirector uses just one LOR data network and starts running the show as soon as power is applied or a trigger is activated. The miniDirector can handle one LOR data network.
The N2-G4-MP3 Director has a built-in clock for scheduling shows and can handle two LOR data networks.
The N4-G4-MP3 Director has a built-in clock for scheduling shows and can handle four LOR data networks.
How many typical songs and sequences will fit on one SD memory card? For 128Kbs encoded MP3 music files and average sized corresponding sequence files, a 512 MB SD card will hold about four hours of lighting commands and audio. You’ll have plenty of capacity for your shows.
Example: N4-G4-MP3 ShowTime Director (with real-time clock)
The fourth generation N4-G4-MP3 ShowTime Director unit is simple to operate. It's designed to control four data networks of Light-O-Rama controllers while simultaneously playing MP3 music files. Create an SD memory card with your show commands, music and schedule using our ShowTime Sequencing Suite, insert the card in the ShowTime Director and you’re done. The Director will run the show based on the predetermined schedule.
The N4-G4-MP3 ShowTime Director supports four high-speed 1000Kbps networks for big displays containing large numbers of smart pixels. Don't need four networks but want the real time clock? Try the N2-G4-MP3 instead.
SD cards up to 32GB are supported.
The unit is housed in a rugged steel housing with convenient mounting slots on the sides. It can be placed on a desktop or mounted in a suitable enclosure for outdoor use. This unit performs in temperatures down to -40 degrees and typically powers itself from a nearby Light-O-Rama controller. 6.5″w x 2.75″h x 1.25″d. The N4-G4-MP3 ShowTime Director is not weatherproof.
Pop out the SD card at any time and insert another to switch shows and/or schedules. The N4-G4-MP3 Director will start the new SD card shows when the card is inserted, as specified by the schedules and/or in response to input triggers. The Director can be powered by a nearby Light-O-Rama controller, so you just turn on power to the controller to start the show. The ShowTime Director can also be powered by your external 12VDC power supply that you can use to turn on and off the show if you don't want to use the internal timer.
The ShowTime Director can also control DMX-512 universes (one on each data network). The sequences must only have DMX-512 universes defined in them. If there is a Light-O-Rama data network defined in the sequence, it will take precedence over any DMX-512 universe.
Need input triggers?
The N4-G4-MP3 ShowTime Director has six external triggers built in. Connect each to a button and link the button to a specific show. When the viewer pushes the button the appropriate show is played. Special note: the ShowTime Director does not accommodate InputPup triggers.
How do you use an MP3 Director with multiple network ports? (N2-G4-MP3 or N4-G4-MP3)
1. The Light-O-Rama ShowTime Sequencing Suite works on your personal computer running Microsoft Windows and allows you to design your own shows. When your show is ready, the show commands and audio are transferred to a standard SD memory card.
2. The standard SD memory card with all the show commands and audio is plugged into your ShowTime Director. The computer running your ShowTime Sequencing Suite is no longer needed.
3. The N2-G4-MP3 ShowTime Director shown replacing the computer.
4. The ShowTime Director can run your show continuously, automatically start/shows shows from it’s built-in clock or use an external triggering device such as a push button or motion sensor.
5. The ShowTime Director has a standard stereo 1/8″ mini-jack for connecting the audio to your sound system or FM transmitter.
6. The Light-O-Rama professional or residential high voltage AC light controllers include special effects such as simple on/off, intensities, smooth fading, twinkling, shimmering. Over 200 controllers can be daisy chained, mixed and matched on one LOR network giving you the ability to command thousands of channels. Need more channels? Add another Light-O-Rama network.
7. Electrical power is supplied to the controller placed close to your lights so you don’t need to run long extension cords. Commands from the ShowTime Sequencing Suite via the ShowTime Director are performed on each controller. Power to each of the attached lighting circuits is controlled independently.
8. The N2-G4-MP3 ShowTime Director can run two dedicated data networks. The networks can be configured as ‘high-speed’ and perfect for high-channel-count pixel displays using our Cosmic Color Ribbons, Bulbs and Pixels.
9. Multiple Cosmic Color Ribbon, Bulbs and Pixel devices connected.
Using multiple N4-G4-MP3 Directors
Want to get even bigger? You can have multiple N4-G4-MP3 Directors and sync them together over a standard LOR data network or wirelessly.
1. The Light-O-Rama ShowTime Sequencing Suite works on your personal computer running Microsoft Windows and allows you to design your own shows. When your show is ready, the show commands and audio are transferred to a standard SD memory card.
2. The standard SD memory card with all the show commands and audio is plugged into your ShowTime Director. The computer running your ShowTime Sequencing Suite is no longer needed.
3. The N4-G4-MP3 ShowTime Director shown replacing the computer.
4. The ShowTime Director can run your show continuously, automatically start/shows shows from it’s built-in clock or use an external triggering device such as a push button or motion sensor.
5. The ShowTime Director has a standard stereo 1/8″ mini-jack for connecting the audio to your sound system or FM transmitter.
6. The Light-O-Rama professional or residential high voltage AC light controllers include special effects such as simple on/off, intensities, smooth fading, twinkling, shimmering. Over 200 controllers can be daisy chained, mixed and matched on one LOR network giving you the ability to command thousands of channels. Need more channels? Add another Light-O-Rama network.
7. Electrical power is supplied to the controller placed close to your lights so you don’t need to run long extension cords. Commands from the ShowTime Sequencing Suite via the ShowTime Director are performed on each controller. Power to each of the attached lighting circuits is controlled independently.
8. The N4-G4-MP3 ShowTime Director can run four dedicated data networks. The networks can be configured as ‘high-speed’ and perfect for high-channel-count pixel displays using our Cosmic Color Ribbons, Bulbs and Pixels.
9. Multiple Cosmic Color Ribbon, Bulbs and Pixel devices connected.
uMP3g4 ShowTime miniDirector
The Light-O-Rama miniDirector is a compact, powerful show director designed to take the place of your PC. It directs a network of LOR controllers or a DMX-512 universe while simultaneously playing MP3 audio files. If there is a Light-O-Rama data network defined in the sequence, it will take precedence over the DMX-512 universe.
Three trigger inputs allow shows to be started by external events like switch closures or motion detectors.
The uMP3g4 ShowTime miniDirector is not weatherproof.
Open the Light-O-Rama ShowTime Sequencing Suite, use the built-in utility to put your show and music on an SD memory card, insert the SD card into your ShowTime miniDirector and watch the lights dance to the music. TheShowTime miniDirector runs your show as soon as power is applied or a trigger is activated. The miniDirector has no real-time clock for scheduling shows.
How do you use a uMP3g4 miniDirector?
1. The Light-O-Rama ShowTime Sequencing Suite works on your personal computer running Microsoft Windows and allows you to design your own shows. When your show is ready, the show commands and audio are transferred to a standard SD memory card.
2. The standard SD memory card with all the show commands and audio is plugged into your ShowTime miniDirector. The computer running your ShowTime Sequencing Suite is no longer needed.
3. The ShowTime miniDirector (ShowTime runs your show and is typically powered from a nearby controller.)
4. The ShowTime miniDirector can run your show continuously anytime power is supplied or use external triggering device such as a push button or motion sensor.
5. The ShowTime miniDirector has a standard stereo 1/8″ mini-jack for connecting the audio to your sound system.
6. (upper example) The Light-O-Rama high voltage AC light controllers include special effects such as simple on/off, intensities, smooth fading, twinkling, shimmering. Over 200 controllers can be daisy chained and mixed/matched on one LOR network giving you the ability to command thousands of channels. Need more channels? Add another Light-O-Rama network.
7. (upper example) Electrical power is supplied to the controller placed close to your lights so you don’t need to run long extension cords. Commands from the ShowTime Sequencing Suite are performed on each controller. Power to each of the attached lighting circuits is controlled independently.
8. (lower example) Smart pixel controller including Cosmic Color and Pixie controllers.
9. (lower example) Smart pixel packages such as a 16×25 (16 vertical strands of 25) or 16×50 (16 vertical strands) pixel trees.
User Manual
View the user manual for the Light-O-Rama Showtime Directors here.
Warranty
All sales are final for Garage Sale products.
Click for more info on product warranties
Original: $199.95
-70%$199.95
$59.98Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Description
Refurbished products have either had minor repair work, or were returned by a customer after minimal or no use during the money back guarantee warranty period. All refurbished products have been tested and are in good working condition.
The N4-G4-MP3 Director is a compact, powerful Light-O-Rama Show Director with a MP3 Player that is designed to take the place of your PC for a show at Christmas, Halloween, or any other event. This device has four networks.
The N2-G4-MP3 Director is a compact, powerful Light-O-Rama Show Director with a MP3 Player that is designed to take the place of your PC for a show at Christmas, Halloween, or any other event. This device has two networks.
To use this Director with RGBPlus sequences, you must have firmware version 6.11 or higher installed.
The unit is simple to operate. Just insert a SD memory card and connect the director to the first controller in your network with a Cat5 line (instead of connecting that controller to a USB485 adapter then your PC).
The on-board real-time clock with power-fail back can be used to schedule shows. Six trigger inputs allow shows to be started by external events, usually momentary switches and/or motion detectors.
This unit is housed in a rugged steel housing with convenient mounting slots on the sides. It can be placed inside your house/garage as is, or placed in an enclosure for outdoor use. This unit performs in temperatures down to -40 degrees.
A SD card writer is required to move the show from your PC to the SD card. If you do not already have one, you should add the SD Card Reader/Writer to your purchase.
Network Speed
Director |
19.2K-57.6K-115K | 500K high speed | 1000K high speed | ELOR (Enhanced) Pro Level |
DMX 512 |
E1.31 (DMX over Ethernet) |
|
| G4-MP3-Director | G4-MP3 Generation 4 deluxe stand-alone show director with MP3 player and real-time clock using latest available firmware. Two or Four networks. | |
|
|
|
|
|
| uMP3g4 miniDirector | Mini-Director uMP3g4 Generation 4 stand-alone show director with MP3 player using latest available firmware. One network. | |
|
|
|
|
|
| G3-MP3-Director | G3-MP3 Generation 3 deluxe stand-alone show director with MP3 player and real-time clock using latest available firmware. | |
|
|
|
|
|
| uMP3g3 miniDirector | Mini-Director uMP3g3 Generation 3 stand-alone show director with MP3 player using latest available firmware. | |
|
|
|
||
Power Cord
The Showtime Director will receive its power from the nearest controller in the majority of cases. A 12V Wall Power Adapter is NOT included with this purchase. You must purchase a 12V Wall Power Adapter to provide power to your Director if ANY of the following are true:
- You would like to connect an external timer instead of using the built in timer on this device
- Your first network contains nothing except our singing faces and Pixie2 controllers
- You will not have any controllers connected to Network 1
To provide auxiliary power to a Director with a Pixie4, Pixie8 or Pixie16, the Pixie must be connected to Net 1 and the jumper must be placed on JP2 of the board to provide power. The jumper is not on the board by default. You do not need to place this jumper if there is an AC Unit that provides power connected to Net 1.
SD Card
If you need a backup card for your Showtime Director, we suggest Kingston or Gigastone Technology 4GB SDHC class 4 SD memory cards because they're rated to work at -20 degrees. SD or SDHC memory cards should be formatted as FAT16 or FAT32. SDXC memory cards (typically 64GB and higher) will not work unless the device is partitioned so the first partition is formatted as FAT32.
Your backup card MUST be 32gb or LESS.
We do NOT recommend using class 2 memory cards. Look for a 2 with a 'C' around it. These are very slow cards and most have trouble keeping up with the demands from Light-O-Rama.
We do NOT recommend any SanDisk SDHC memory cards. Many of our customers have reported issues making them work in Light-O-Rama ShowTime Directors.
Details
Don’t want to dedicate a personal computer to control your show? We’ve made it easy with our ShowTime Director series. Simply create your show as normal with our ShowTime Sequencing Suite on your Microsoft Windows based computer, use a Light-O-Rama application to transfer all the show commands and audio to an SD memory card and plug that SD memory card into one of our ShowTime Directors. The Light-O-Rama ShowTime Director replaces your computer in a Light-O-Rama data network.
The miniDirector uses just one LOR data network and starts running the show as soon as power is applied or a trigger is activated. The miniDirector can handle one LOR data network.
The N2-G4-MP3 Director has a built-in clock for scheduling shows and can handle two LOR data networks.
The N4-G4-MP3 Director has a built-in clock for scheduling shows and can handle four LOR data networks.
How many typical songs and sequences will fit on one SD memory card? For 128Kbs encoded MP3 music files and average sized corresponding sequence files, a 512 MB SD card will hold about four hours of lighting commands and audio. You’ll have plenty of capacity for your shows.
Example: N4-G4-MP3 ShowTime Director (with real-time clock)
The fourth generation N4-G4-MP3 ShowTime Director unit is simple to operate. It's designed to control four data networks of Light-O-Rama controllers while simultaneously playing MP3 music files. Create an SD memory card with your show commands, music and schedule using our ShowTime Sequencing Suite, insert the card in the ShowTime Director and you’re done. The Director will run the show based on the predetermined schedule.
The N4-G4-MP3 ShowTime Director supports four high-speed 1000Kbps networks for big displays containing large numbers of smart pixels. Don't need four networks but want the real time clock? Try the N2-G4-MP3 instead.
SD cards up to 32GB are supported.
The unit is housed in a rugged steel housing with convenient mounting slots on the sides. It can be placed on a desktop or mounted in a suitable enclosure for outdoor use. This unit performs in temperatures down to -40 degrees and typically powers itself from a nearby Light-O-Rama controller. 6.5″w x 2.75″h x 1.25″d. The N4-G4-MP3 ShowTime Director is not weatherproof.
Pop out the SD card at any time and insert another to switch shows and/or schedules. The N4-G4-MP3 Director will start the new SD card shows when the card is inserted, as specified by the schedules and/or in response to input triggers. The Director can be powered by a nearby Light-O-Rama controller, so you just turn on power to the controller to start the show. The ShowTime Director can also be powered by your external 12VDC power supply that you can use to turn on and off the show if you don't want to use the internal timer.
The ShowTime Director can also control DMX-512 universes (one on each data network). The sequences must only have DMX-512 universes defined in them. If there is a Light-O-Rama data network defined in the sequence, it will take precedence over any DMX-512 universe.
Need input triggers?
The N4-G4-MP3 ShowTime Director has six external triggers built in. Connect each to a button and link the button to a specific show. When the viewer pushes the button the appropriate show is played. Special note: the ShowTime Director does not accommodate InputPup triggers.
How do you use an MP3 Director with multiple network ports? (N2-G4-MP3 or N4-G4-MP3)
1. The Light-O-Rama ShowTime Sequencing Suite works on your personal computer running Microsoft Windows and allows you to design your own shows. When your show is ready, the show commands and audio are transferred to a standard SD memory card.
2. The standard SD memory card with all the show commands and audio is plugged into your ShowTime Director. The computer running your ShowTime Sequencing Suite is no longer needed.
3. The N2-G4-MP3 ShowTime Director shown replacing the computer.
4. The ShowTime Director can run your show continuously, automatically start/shows shows from it’s built-in clock or use an external triggering device such as a push button or motion sensor.
5. The ShowTime Director has a standard stereo 1/8″ mini-jack for connecting the audio to your sound system or FM transmitter.
6. The Light-O-Rama professional or residential high voltage AC light controllers include special effects such as simple on/off, intensities, smooth fading, twinkling, shimmering. Over 200 controllers can be daisy chained, mixed and matched on one LOR network giving you the ability to command thousands of channels. Need more channels? Add another Light-O-Rama network.
7. Electrical power is supplied to the controller placed close to your lights so you don’t need to run long extension cords. Commands from the ShowTime Sequencing Suite via the ShowTime Director are performed on each controller. Power to each of the attached lighting circuits is controlled independently.
8. The N2-G4-MP3 ShowTime Director can run two dedicated data networks. The networks can be configured as ‘high-speed’ and perfect for high-channel-count pixel displays using our Cosmic Color Ribbons, Bulbs and Pixels.
9. Multiple Cosmic Color Ribbon, Bulbs and Pixel devices connected.
Using multiple N4-G4-MP3 Directors
Want to get even bigger? You can have multiple N4-G4-MP3 Directors and sync them together over a standard LOR data network or wirelessly.
1. The Light-O-Rama ShowTime Sequencing Suite works on your personal computer running Microsoft Windows and allows you to design your own shows. When your show is ready, the show commands and audio are transferred to a standard SD memory card.
2. The standard SD memory card with all the show commands and audio is plugged into your ShowTime Director. The computer running your ShowTime Sequencing Suite is no longer needed.
3. The N4-G4-MP3 ShowTime Director shown replacing the computer.
4. The ShowTime Director can run your show continuously, automatically start/shows shows from it’s built-in clock or use an external triggering device such as a push button or motion sensor.
5. The ShowTime Director has a standard stereo 1/8″ mini-jack for connecting the audio to your sound system or FM transmitter.
6. The Light-O-Rama professional or residential high voltage AC light controllers include special effects such as simple on/off, intensities, smooth fading, twinkling, shimmering. Over 200 controllers can be daisy chained, mixed and matched on one LOR network giving you the ability to command thousands of channels. Need more channels? Add another Light-O-Rama network.
7. Electrical power is supplied to the controller placed close to your lights so you don’t need to run long extension cords. Commands from the ShowTime Sequencing Suite via the ShowTime Director are performed on each controller. Power to each of the attached lighting circuits is controlled independently.
8. The N4-G4-MP3 ShowTime Director can run four dedicated data networks. The networks can be configured as ‘high-speed’ and perfect for high-channel-count pixel displays using our Cosmic Color Ribbons, Bulbs and Pixels.
9. Multiple Cosmic Color Ribbon, Bulbs and Pixel devices connected.
uMP3g4 ShowTime miniDirector
The Light-O-Rama miniDirector is a compact, powerful show director designed to take the place of your PC. It directs a network of LOR controllers or a DMX-512 universe while simultaneously playing MP3 audio files. If there is a Light-O-Rama data network defined in the sequence, it will take precedence over the DMX-512 universe.
Three trigger inputs allow shows to be started by external events like switch closures or motion detectors.
The uMP3g4 ShowTime miniDirector is not weatherproof.
Open the Light-O-Rama ShowTime Sequencing Suite, use the built-in utility to put your show and music on an SD memory card, insert the SD card into your ShowTime miniDirector and watch the lights dance to the music. TheShowTime miniDirector runs your show as soon as power is applied or a trigger is activated. The miniDirector has no real-time clock for scheduling shows.
How do you use a uMP3g4 miniDirector?
1. The Light-O-Rama ShowTime Sequencing Suite works on your personal computer running Microsoft Windows and allows you to design your own shows. When your show is ready, the show commands and audio are transferred to a standard SD memory card.
2. The standard SD memory card with all the show commands and audio is plugged into your ShowTime miniDirector. The computer running your ShowTime Sequencing Suite is no longer needed.
3. The ShowTime miniDirector (ShowTime runs your show and is typically powered from a nearby controller.)
4. The ShowTime miniDirector can run your show continuously anytime power is supplied or use external triggering device such as a push button or motion sensor.
5. The ShowTime miniDirector has a standard stereo 1/8″ mini-jack for connecting the audio to your sound system.
6. (upper example) The Light-O-Rama high voltage AC light controllers include special effects such as simple on/off, intensities, smooth fading, twinkling, shimmering. Over 200 controllers can be daisy chained and mixed/matched on one LOR network giving you the ability to command thousands of channels. Need more channels? Add another Light-O-Rama network.
7. (upper example) Electrical power is supplied to the controller placed close to your lights so you don’t need to run long extension cords. Commands from the ShowTime Sequencing Suite are performed on each controller. Power to each of the attached lighting circuits is controlled independently.
8. (lower example) Smart pixel controller including Cosmic Color and Pixie controllers.
9. (lower example) Smart pixel packages such as a 16×25 (16 vertical strands of 25) or 16×50 (16 vertical strands) pixel trees.
User Manual
View the user manual for the Light-O-Rama Showtime Directors here.
Warranty
All sales are final for Garage Sale products.
Click for more info on product warranties
